Pillar Candles – A Shape Discovered by Ancient Egyptians
Cylindrical Candles with a 2 cm Diameter — Slim Pillars, Poured by Hand
The slimmest cylindrical candles we make measure exactly 2 cm in diameter — and because a true cylinder never tapers, every candle holds that same 2 cm width from the top edge to the base. If you need a matching set where all candles have the same diameter, this is the format built for it. We pour them by hand in Královské Poříčí, alongside every larger size up to 25 cm across and custom giants up to 180 cm tall.
The 2 cm Line — One Diameter, Top to Bottom
Our 2 cm cylinders are the thinnest pillar format we produce, made in heights from 10 to 30 cm. They fit standard taper candleholders, advent wreaths, and tight table arrangements — anywhere a classic taper would go, but with straight sides and steady, even burning. Burn time is roughly 6–12 hours depending on height. Because we pour to order, a whole batch comes out identical — same diameter, same height, same colour.
The Full Diameter Range — Up to 25 cm
Slim Cylinders (diameter 2–4 cm, height 10–30 cm)
The 2 cm format described above, plus its slightly wider siblings up to 4 cm. Dinner table accents, advent wreath fillers, replacements for tapers in narrow holders.
Small Pillars (diameter 5–10 cm, height 7.5–20 cm)
For the dinner table, bathroom, bedside table. Burns 20–40 hours. Stands on its own, no candleholder needed.
Medium Pillars (diameter 10–15 cm, height 20–50 cm)
Classic for the living room. Lasts a week of daily use.
Large Pillars (diameter 15–25 cm, height 50–100 cm)
Statement piece. Burns easily 200+ hours.
Giants (height 100–180 cm)
This is not a candle, it is a sculpture — the largest reach 180 cm and weigh more than a child. Custom-made for weddings, exhibitions, film productions.
Why the Cylinder Shape Wins
- One constant diameter — a cylinder is the same width along its whole length, so it burns predictably and fits its holder from first light to last
- Even burning — flame stays centred, wax melts symmetrically
- Maximum stability — low centre of gravity, wide base, will not tip
- Universal fit — works for romantic dinners, restaurants, churches, shop windows
- Honest pricing — simple geometry means lower production cost passed to you
Materials We Use
Every cylindrical candle is poured by hand in our workshop in Královské Poříčí. We use a high-quality paraffin wax blend without palm oil.
Cotton wicks throughout. Custom diameters, heights, and colours produced to order within one week — including full sets of cylindrical candles with a uniform 2 cm diameter.
Practical Notes for Cylindrical Candles
Trim the wick to about 5 mm before each lighting. Burn on a heat-resistant plate. Keep away from draughts — a flickering flame eats wax unevenly and shortens burn time. For 2 cm diameter cylinders, expect 1–2 hours of burning per centimetre of height. For thicker pillars from 7 cm upwards, the first burn should last long enough for the melt pool to reach the outer edge, otherwise the candle tunnels.
Frequently Asked Questions
How long does a 2 cm cylindrical candle burn?
Roughly 6–12 hours depending on height. A 2×20 cm slim cylinder lasts about 10 hours of continuous use.
Do all candles in one order have the same diameter?
Yes. A cylinder holds its diameter along its full length, and candles poured in one batch are identical — so a set of 2 cm cylinders is 2 cm across on every piece.
Does the wax drip on the table?
With no draught and a properly trimmed wick, the wax stays inside the candle. We still recommend a plate underneath.
Can I order an exact diameter or height?
Yes. Custom production takes about a week. Tell us diameter, height, colour, and quantity.
Need cylindrical candles in one uniform diameter? Send dimensions, colour, and quantity: 723 913 541 or info@svitsol.cz
Custom orders ready within a week.
